CTX 700 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. CTX700 General Discussion Forum
    I wanted to troubleshoot my click problem and seen that my chain was misaligned a little bit so I took off rear axle nut and went ahead and aligned the tire and chain the best I could while achieving optimal tension definitely not perfect but it’s the best I could do. So now I noticed that these...
  2. Engine and Powertrain Discussion
    Hi Fellas and Gals. I noticed a while back that my final drive chain was a bit loose, and when I measured the chain for sag, sure enough, it was adjustment time. So, I figured I'd DIY and bring the chain tension back into spec. Incidentally, the bike is a CTX 700N manual with a little over...
  3. Technical Discussion
    I've read the manual and the info in the forum on chain tension. Seemed straightforward. I measure it with the bike on the side stand as that is what Honda recommends. When I measure it in what looks like the center to me, I can move it about an inch and a 1/2 and then it hits the rubber...
1-3 of 3 Results