|Topic Review (Newest First)|
|05-15-2019 01:25 AM|
|kurthin||This was the previous Rivco Mount sandwiched in the rear rack that looked way to big. It gives you an idea of what it looks like flying the flag|
|05-15-2019 01:20 AM|
|kurthin||I fly full sized flag for parades and events and needed to create a nice looking mount. Utilized Rivco Mount after welding a 3/16 flat piece of steel on the rear carrier and painting.|
|11-07-2015 10:05 PM|
|IntrovertBiker||Here is my Rivco dual flag holder. Over 1000 miles using it with no issues. I did bend the bracket a little to allow a little clearance for my top box.|
|11-07-2015 09:41 AM|
SSP Flags Inc. - Motorcycleflags.com
I have not used any of these on my CTX, but I used them on my Vulcan 900. I attached the flag pole to my top case, I never had a problem at any speed.
|11-07-2015 09:19 AM|
Or...make your own!
|11-07-2015 05:57 AM|
Originally Posted by Pat View Post
I am using the bottom mount for the same reason. It was an easy change. No issues with the mount or the flags.
|11-06-2015 10:08 PM|
|Pat||I have the same Rivco mount that LoJo posted; only word of caution was that it was a tad too high--not enough space to clear my top box. I had to mount it to the bottom of the license plate (it's designed for the top) which required a little bit of modification.|
|11-06-2015 03:03 PM|
I ended up with the flag mount with flags linked below. I am also using the second linked flags as one of my flags. The mount is solid. No issues at highway speeds.
Rivco License Plate Mounted Double Flag Holder with Two USA Flags FH100 | eBay
Small Biker Flag Live to Ride Ride to Live Motorcycle Flag Biker 6" x 9" | eBay
|09-08-2015 02:56 AM|
|Reed47||I would like to put a flag on mine as well! Who has one?|
|09-08-2015 02:46 AM|
|Effem Tee||I went down the flag route years ago, when I rode scoots. I like my NDT CTX clean, nowadays. I do have a flag decal, if that counts. And a flag patch on one of my riding shirts.|
|This thread has more than 10 replies. Click here to review the whole thread.|